botblox logo
botblox
Create
Roadmap
Feedback
SPE Switch

    Boards

  • SPE Switch

Powered by Canny

SPE Switch

posts
5-60V Voltage Input Range
2
·

in progress

100Mbps+ bandwith SPE
Looking for long range SPE alternative to 300-ft max twisted pair with similar bandwidth
0
Dimensions below 40mm x 40mm x 15mm
These dimensions include the chassis for the product
0
Option for Solder Pads instead of an official SPE port
SPE ports are pretty bulky, an option to have just solder pads instead would help with integration into small/tight spaces on a robot.
0
PHY expansion port for RJ45
Have a connector that you can add an RJ45 + magnetics to as an option so that the main board can be smaller if you don't need an RJ45 port.
0
GIGASTAX compatibility for more ports if required
3
·

under review

Open source hardware and software
0
RJ45 1Gbps Uplink Port
Add an RJ-45 port for standard 1000BASE-T ethernet for the uplink port
0
SFP uplink port
Add an SFP to the switch. This would add considerable size, and some cost.
4
Phoenix Contact SPE ports
We would use the Phoenix Contact SPE port (MPN: 1163797) because it is the smallest available. Standard wires can be adapted to this connector using MPN: 1343953
0
Load More
→
Powered by Canny